TSC Series Controller
振動應力消除機 高階-全能型 TSC-01S
型號:TSC-01S
產品尺寸:W370mm/D450mm/H180mm(MAX)
工作電壓:單相110VAC /220VAC
部件重量:12kg±10%kg (不含電源線)
功能特色:
Ⅰ功能特色:
˙系統參數全程即時監控
˙警報與保護機制
˙具備多功能操作介面
˙過電流保護裝置
˙突波保護裝置
˙全能型-具備應力消除功能及同步銲接功能
Ⅱ振動應力消除特色:
˙自動化掃描、以高頻波進行振動應力消除
˙自動化計算出各模式適用的振動頻率
˙自動消除應力程序流程化及自動循環
˙頻譜數據的顯示功能
˙頻譜數據內部儲存功能
˙頻譜數據資料讀取功能
Ⅲ同步銲接特色:
˙漏電保護機制
˙溫控保護裝置
˙自動化掃描高頻波進行振動應力消除
˙施工過程同步修正高頻波數據
產品尺寸:W370mm/D450mm/H180mm(MAX)
工作電壓:單相110VAC /220VAC
部件重量:12kg±10%kg (不含電源線)
功能特色:
Ⅰ功能特色:
˙系統參數全程即時監控
˙警報與保護機制
˙具備多功能操作介面
˙過電流保護裝置
˙突波保護裝置
˙全能型-具備應力消除功能及同步銲接功能
Ⅱ振動應力消除特色:
˙自動化掃描、以高頻波進行振動應力消除
˙自動化計算出各模式適用的振動頻率
˙自動消除應力程序流程化及自動循環
˙頻譜數據的顯示功能
˙頻譜數據內部儲存功能
˙頻譜數據資料讀取功能
Ⅲ同步銲接特色:
˙漏電保護機制
˙溫控保護裝置
˙自動化掃描高頻波進行振動應力消除
˙施工過程同步修正高頻波數據
TSM Series Oscillators
低頻高波振盪器 TSM-01
型號:TSM-01
產品尺寸:W310mm/D285mm/H200mm(MAX)
搭配使用控制器型號: TSC-01s、TSC-02
部件重量: 13kg±10%kg (含連接線)
產品說明:
產品特性:
˙以低頻的振盪生成高波頻寬
˙高波頻寬符合美國專利號碼US 7703325 B2
為最佳達到釋放殘留應力之頻率
˙適用重量1000~8000kg
˙激振力固定型
產品尺寸:W310mm/D285mm/H200mm(MAX)
搭配使用控制器型號: TSC-01s、TSC-02
部件重量: 13kg±10%kg (含連接線)
產品說明:
產品特性:
˙以低頻的振盪生成高波頻寬
˙高波頻寬符合美國專利號碼US 7703325 B2
為最佳達到釋放殘留應力之頻率
˙適用重量1000~8000kg
˙激振力固定型
低頻高波振盪器 TSM-02L/H
型號:TSM-02L/H
產品尺寸:W240mm/D282mm/H180mm(MAX)
搭配使用控制器型號: TSC-01s、TSC-02
部件重量: 15 kg±10%kg (含連接線)
產品特性:
˙以低頻的振盪生成高波頻寬
˙高波頻寬符合美國專利號碼US 7703325 B2
為最佳達到釋放殘留應力之頻率
˙TSM-02L適用重量2000~15000kg
˙TSM-02H適用重量3500~18000kg以上
˙激振力可調型
產品尺寸:W240mm/D282mm/H180mm(MAX)
搭配使用控制器型號: TSC-01s、TSC-02
部件重量: 15 kg±10%kg (含連接線)
產品特性:
˙以低頻的振盪生成高波頻寬
˙高波頻寬符合美國專利號碼US 7703325 B2
為最佳達到釋放殘留應力之頻率
˙TSM-02L適用重量2000~15000kg
˙TSM-02H適用重量3500~18000kg以上
˙激振力可調型
Other
Vibration stress elimination machine
1. The complete set of equipment includes one controller (TSC series), one oscillators (TSM series), one Amplitude sensor, two C-type clamp and four rubber pads.
2. TSC series controller selection:
A. Model: TSC-01S for vibration stress relief and synchronous welding works, such as two-in-one all-round type.
B. Model: TSC-02 is only suitable for vibration stress relief works dedicated machine.
3. TSM series of vibration motor selection (according to the size of the workpiece):
A. Model: TSM-01 for 2 meters cubic cross-sectional area of the largest weight of 15000kg of the workpiece
B. Model: TSM-02H for 2 meters cubic cross-sectional area of the largest weight of 1000 ~ 21000kg of the workpiece
C. Model: TSM-02L for 2 meters cubic cross-sectional area of the largest weight of 200 ~ 10000kg of the workpiece
4 .. When the workpiece is too light or the process of beating phenomenon, the need to re-design the fixture platform to increase the fixed transfer to indirectly.
5. One of the group of Zhenfu test, two C-clamp and four rubber pads, for the purchase of complete sets of equipment included.
2. TSC series controller selection:
A. Model: TSC-01S for vibration stress relief and synchronous welding works, such as two-in-one all-round type.
B. Model: TSC-02 is only suitable for vibration stress relief works dedicated machine.
3. TSM series of vibration motor selection (according to the size of the workpiece):
A. Model: TSM-01 for 2 meters cubic cross-sectional area of the largest weight of 15000kg of the workpiece
B. Model: TSM-02H for 2 meters cubic cross-sectional area of the largest weight of 1000 ~ 21000kg of the workpiece
C. Model: TSM-02L for 2 meters cubic cross-sectional area of the largest weight of 200 ~ 10000kg of the workpiece
4 .. When the workpiece is too light or the process of beating phenomenon, the need to re-design the fixture platform to increase the fixed transfer to indirectly.
5. One of the group of Zhenfu test, two C-clamp and four rubber pads, for the purchase of complete sets of equipment included.